Inspired by many reader requests for a DIY tutorial to recreate the glittery mason jar vases from this New Year’s Eve party, today we’re playing with glitter. A whole lot of glitter! I whipped up two different versions of these glitter vasses, both of which are quick and easy. They’re perfect for parties, weddings or just to add a touch of sparkle to your dining room table. I seriously love how they turned out!
Supplies –
- Glass containers (preferably with smooth, straight sides)
- Glitter (I used Martha Stewart Crafts glitter in Wintermint and Bronze from Michaels)
- Foam brush
- Painter’s tape
- ModPodge
For the first vase I used a small cylindrical vase and using the foam brush, applied a thin and even coat of ModPodge on the interior walls of the vase. Next up, I dumped in a generous amount of glitter and rolling the vase in my hands, tapped the sides to get the glitter to evenly coat the ModPodge.
Then I just let the vase dry. It takes a few hours, depending on how thick you apply the ModPodge. Any excess glitter can just be scooped up and put back in the original container for reuse. If you miss any spots on the vase, simply apply a second coat using the same technique using a thin layer of ModPodge, then applying glitter and swirling to coat.
For the second version, I used a mason jar and went for a glitter-dipped look. First up, mark off your jar with a piece of painter’s tape. How much of the surface you want to be covered in glitter will determine where to put the tape. I went about 2/3 of the way up. Then cover the area below the tape with ModPodge using a foam brush.
Next up, I used a copper glitter and coated the outside of the vase. You’ll get a big mess with this one so make sure you have kraft paper or something similar covering your workspace. Then simply fold the paper up like a funnel and sift the excess glitter back into the jar when you’re done. Once the glitter/glue combination is dry, apply an additional thin coat of ModPodge on the outside of the glass (or spray with a spray sealant being sure to protect the area not coated with glitter from getting sprayed) to lock the glitter in place!
Once everything was nice and dry, I had two of the prettiest vases going! These would also look adorable holding makeup brushes on a vanity or keeping pens and pencils neat and tidy on your desk. Glitter! Seriously, who doesn’t just love glitter?
Many thanks to my lovely friend Alice G. Patterson who is going to be rockin’ out all kinds of awesome DIY shoots with me in the coming months. Stayed tuned for lots more!
{Design + styling by Cyd Converse for The Sweetest Occasion. | Photos by Alice G. Patterson.}
The fine print: Please link with love! As with all of our posts, DIY projects featured on The Sweetest Occasion may not be copied, distributed or reproduced without express written permission. Love and links are always appreciated! If you’d like to share this post, please link to this post directly for the DIY tutorial and do not include the instructions in your own post. Thanks so much! xoxo
Back to Top
I did yesterday and I loved it! I’m a beginner at crafting so it was definitely a great starting place. I just had one problem. When I pick up the jar, the one with the glitter on the outside, the glitter comes off on my hands. Should I put another coat of ModPodge over it or would a sealant be better?
Thanks!!!
Hi Erika! Yup! Another coat of ModPodge on the outside or a spray sealant will keep all the glitter in place! :-) I’m so glad you love how they turned out.
simply wow! great ideas by great mind :)
I can see how this is perfect for weddings but also to have around the home. What a great idea!
For the glitter that goes in the vase… can you still but water in there once it is dry??
Hi Kate! Yup! The ModPodge is a glue and sealer in one so water in the vases is just fine. If over time you find any of it flaking off, you can just apply another coat, but mine are still holding up great! :-)
I tried this tutorial on a vase I happened to have, but with a lot more tape, to create more glittery geometry. Thank you so much for posting this! I followed your instructions and they worked out perfectly. See my results: http://www.thecraftitect.com/?p=290
I am doing these for my centerpieces as well. I had 8inch cylinder vases and planned on doing the white hydrangea, and when I saw this I was so excited. It brought in a way to bring in blue, which is my other wedding color. I am going to purchase the glitter this week and was wondering how much I should purchase. I found the kind you used at Michaels. I have 8 vases to do. Any guess? I was thinking 4 bottles?
Hi Sam! I would guess you shouldn’t need more than 2 – 3 bottles, but you could always buy 4 to be safe and return them if you have extra. I did my vases over a piece of paper, dumped the glitter on liberally and then carefully poured the extra back into the bottle, so there wasn’t much waste. After doing 2 vases in the same color, I probably still had close to 2/3 of the glitter left. I hope this helps!
Can you tell me what size of jar you used for the rose gold jar? And where you got it? Thanks!
Love this idea! Adorable + affordable :)
That is a very cute craft idea. Easy and it looks super simple but fancy!
I love this project and I made some similar after seeing your blog. Thanks for the idea. One problem that I have though is that mine get glitter everywhere. Can you give me any tips/ tricks to making the glitter stay. Did I just not dump enough glitter out or not use enough modgepodge?
They are in gold and rust glitter though for fall and look so stunning when candles are lit in them. I love the way they twinkle.
Hi Jasmine! Another layer of ModPodge on top may do the trick, or you might want to try a clear spray-on sealer, which you can find at places like Lowes and Home Depot with the spray paint. Hope this helps! :-)
gorgeous idea … love.